User Tools

Site Tools


usb-devices:ch341a:3v-ch341a-mod

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
usb-devices:ch341a:3v-ch341a-mod [2020/03/15 15:26] – [Testing for 5V] chuckusb-devices:ch341a:3v-ch341a-mod [2024/03/17 13:15] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ======3.3V CH341a Signal Output Modification====== ======3.3V CH341a Signal Output Modification======
 +
 +----
 +
 +<WRAP announcement red smaller >
 +==Warning==
 +It is NOT recommended to use the CH341a for flashing!\\
 +The following page for recommendations and an explanation of why the CH341a is not advised:\\
 +https://libreboot.org/docs/install/spi.html#do-not-use-ch341a
 +</WRAP>
 +
 After realizing that my Black CH341a was not working as intended while [[laptop:lenovo-x230:flash-lenovo-x230-coreboot|flashing my x230 with Coreboot]], (it was sending 5V to the signal outputs instead of 3.3V) I decided to attempt the [[https://www.eevblog.com/forum/repair/ch341a-serial-memory-programmer-power-supply-fix/msg1323775/#msg1323775|fix]] I found online. It went well and only took about 15 minutes. All that is required is a decent soldering iron, a couple of hand tools, some small wire and a good amount of patience. After realizing that my Black CH341a was not working as intended while [[laptop:lenovo-x230:flash-lenovo-x230-coreboot|flashing my x230 with Coreboot]], (it was sending 5V to the signal outputs instead of 3.3V) I decided to attempt the [[https://www.eevblog.com/forum/repair/ch341a-serial-memory-programmer-power-supply-fix/msg1323775/#msg1323775|fix]] I found online. It went well and only took about 15 minutes. All that is required is a decent soldering iron, a couple of hand tools, some small wire and a good amount of patience.
  
 ---- ----
 +
 ====Testing for 5V==== ====Testing for 5V====
  
-{{gallery> usb-devices:ch341a:3v-mod:?ch341a-*-5v.jpg&250x250&1920X1080&2&lightbox }}+{{gallery> usb-device:ch341a:3v-mod:?ch341a-*-5v.jpg&250x250&1920X1080&2&lightbox }}
  
 ---- ----
Line 50: Line 61:
   - To be extra cautious, feel free to place a small piece of electrical tape over the pad to prevent any accidental short circuits.   - To be extra cautious, feel free to place a small piece of electrical tape over the pad to prevent any accidental short circuits.
  
-{{gallery> :zzz-site:ch341a:?ch341a_soldered_*.jpg&250x205&1920X1080&2&lightbox }}+{{gallery> usb-device:ch341a:3v-mod:?ch341a-soldered-*.jpg&250x205&1920X1080&2&lightbox }}
  
 ---- ----
Line 64: Line 75:
  
  
-{{gallery>:zzz-site:ch341a:?ch341a_*_3.3v-1080.jpg&175x175&1920X1080&4&lightbox }}+{{gallery> usb-device:ch341a:3v-mod:?ch341a-*-3.3v.jpg&250x250&1920X1080&2&lightbox }}
  
  
Line 74: Line 85:
   * [[https://www.eevblog.com/forum/repair/ch341a-serial-memory-programmer-power-supply-fix/|EEV Blog]]   * [[https://www.eevblog.com/forum/repair/ch341a-serial-memory-programmer-power-supply-fix/|EEV Blog]]
   * [[http://www.advanced-monolithic.com/pdf/ds1117.pdf|DS1117 Schematic]]   * [[http://www.advanced-monolithic.com/pdf/ds1117.pdf|DS1117 Schematic]]
 +
usb-devices/ch341a/3v-ch341a-mod.1584285990.txt.gz · Last modified: by chuck